首 页科技博览科普图片植物王国动物世界科普常识农村科普生活科普信息技术科普创作自然之谜
专利历史今天留言繁體中文
设为首页
加入收藏
联系我们
您当前的位置:科普知识网 -> 材料科学 -> 复合材料 -> 博览内容 退出登录 用户管理
 

· 纳米材料 · 建筑材料
· 陶瓷材料 · 汽车材料
· 复合材料 · 机械知识
相关博览
· 库尔特·哥德尔(ku..
· 《梓人遗制》 Time-..
· Cape,mountains
· Carpathian mountai..
· Caucasus mountains..
· Rocky mountains
· 圆屋roundhouse
· 滇楸(Catalpa duclo..
· 秃杉(Taiwania flou..
· 苔类 石地钱(Rebou..

Out-of-Plane Strengthening of Masonry Walls with Reinforced Composites

Sameer A. Hamoush 单  位: Dept., North Carolina A&T State Univ., Gre  Journal of Composites for Construction, Vol. 5, No. 3, August 2001, pp. 139-145  
关键词 Composite materials;Walls;Masonry;Fiber reinforced materials;Static loads;Retrofitting摘  要This paper presents an investigation into the effectiveness of using fiber-reinforced composite overlays to strengthen existing unreinforced masonry walls to resist out-of-plane static loads. A total of fifteen wall panels [1,200 x 1,800 x 200 mm (4 ft. x 6 ft. x 8 in.)] were tested. Twelve panels were assembled with fiber-reinforcing systems attached to the tension side, and the remaining three control walls were left without any external reinforcement. Two configurations of external reinforcement were evaluated. The first reinforcement configuration consisted of two layers of fiber-reinforced plastic webbing and the second consisted of vertical and horizontal bands of unidirectional fiber composites. The three wall specimens without external reinforcement were tested to evaluate the change in the system strength and behavior with application of the external reinforcing system. In addition to the two fiber configurations, the testing program also evaluated two methods of surface preparation of the walls, sand blasting, and wire brush. All specimens were thoroughly washed by water jet, 48 hours prior to application of the fiber-reinforcing systems. Three specimens were tested for each variable. A uniformly distributed lateral load was applied to each panel using the procedures described in the ASTM Standard E-72 Test Method (airbag). Failure loads strains in the external reinforcement (FRP), out-of-plane deformations, and failure modes were recorded. Recommendations on the usefulness of the proposed technique as a means of strengthening masonry walls for out-of-plane loads are presented. In general, flexural strength of masonry walls can be increased if the shear failure is controlled.




















本站所有内容资源来自互联网收集,版权归原创作者或原单位公司所有。联系:kpzsnet#126.com (#改为@)
[] [返回上一页] [打 印] [收 藏]
关于本站 - 帮助 - 合作 - 声明 - 连接 - 地图 -
Copyright ?2002-2005 Kpzs.Net. All Rights Reserved .
BY::KPZS.NET